Fabric Book

This is my latest creation, one I've been working on for some weeks but decided to wait until it was finished before I revealed it.

I've been drawn to hand made fabric books for some time so felt it was time I made one myself and as the sea and beaches play such a large part in in life, it was a no-brainer when it came to the subject.

So, what's inside .......

Starting with the sea, I layered various fabrics, lace and trimmings which were hand stitched to a background of indigo dyed fabric (fabric I have had for  over 25 years!).  I added some hand stitching including French knots, buttonhole stitch and straight stitch before oversewing around the edges.

For this seashells page, I starting by cutting my own rubber stamp with two different sized shells.  I've used shells in other pieces of work and have looked before for a rubber stamp but as I could never find one, I thought cutting my own would mean I'll have it to use in the future.

The shells were printed on to a piece of my own dyed  yellow fabric and the outlines were hand stitched with backstitch.   The text was printed on to tape and attached with running stitch.  Pieces of shell were added to finish before the edges were again oversewn.

I just love beach huts so they had to be included.   I always take photos of beach huts when I see them so this one, taken at Avon Beach, was printed on to fabric and applied to a background of blue and yellow fabric which I had dyed.   Simple straight stitches were added to the 'sand' to represent the grass that grows on the beach and a couple of seagulls were added to the sky.  Again, as with every page, the edges were oversewn.

No trip to the beach is complete without building a sandcastle!   We've made many when having a day on the beach with the grandchildren so they had to feature in this book.

This was quite simple - backstitched outlines on a piece of hand dyed fabric.

Some years ago, I took a photo of a wooden groyne at Littlehampton in which seaweed had become trapped and then been bleached by the sun.   At the time I was very taken with the image and felt sure there was something creative I could do with it and finally it's happened. 

I started with a piece of cream fabric which I coloured in various ways including paint and water soluble crayons and pencils and adding the timber grain lines with a drawing pen,   I wanted the colour to be quite subtle which is why it looks as though the fabric has not been coloured!

I created a piece of seaweed by machine embroidery on soluble fabric but as it was a bit stiff I cut in to it to roughen it up a bit.  This was stitched into a slit in the fabric along with various lengths of different threads.  A line of backstitch was added along the bottom for balance.

The final fishy page has the outline of a fish in stem stitch with lines of sequins had stitched in rows. Lines of backstitch and fly stitch added detail to the fins and tail and feather stitched was used for the seaweed.   The text was backstitch around the edge.

When I came to the cover I used up scraps and off cuts of blue and yellow fabric that I had used for the pages.  I used bondaweb to secure the pieces and then added running stitch and lines of straight stitch to secure some of the edges.   I put a piece of light fusible Vilene to give the cover a bit more weight and then buttonholed around the edge of the cover and lining.

The pages and cover were secured with stitching down the spine.

Hopefully this will be the first of many fabric books!

Other creations this month

I was a bit late with my Journal Quilt this month.  It was done within September but for the past few years I have been ahead of myself so I felt quite guilty that it wasn't done until the middle of the month.

This month I reached the "blue" month so decided to have something linked to the sea for the gelli printing.   I've made my own print blocks with polystyrene in the past so used this method to create some texture on the plate inspired by waves and using fabric paints, printed some of my dyed blue fabric.  I used two or three different shades of blue fabric paint but once again I found that you don't get the same definition as you do when using acrylic paint.  The results were good though for the task in hand.

For the Log Cabin part of the quilt, I've again used the Courthouse Steps as the basis of the design with a bit of a twist.   For three of the sides I used different shades of my own dyed blue fabric and then the gelli printed fabric for the fourth side and the binding.

For the quilting I used a stitch on my machine which gives the appearance of waves going up and down.

It's time for a change of season so my thoughts turned to ideas for an Autumn hoop for my mantelpiece display.   I love the colours of Autumn - I always think it is because I was an Autumn baby!- so I knew it had to be something to reflect the colours.

My choice was a simple maple leaf (another favourite, particularly at Autumn) and luckily I found just the pattern I needed on the internet.  I've gone back to cross stitch after many years absence and as I enjoyed it so much, I think there will be more.  So therapeutic!

The display in coming together but I want to add some sort of foliage in a vase so am still thinking about that.   The other hoop and owls are from a Craftpod box I did last year when I began my seasonal project.

The garland of Autumn leaves is another pattern from Attic24 which I made using the ends of yarn left over from her Woodland Blanket which I made earlier this year.

Journal Quilt - Green and Blue

For the August Journal Quilt, I used green and blue fabrics from my stash of hand dyed fabrics.   Some I printed on the gelli plate using a stencil which had some text.   It was one of those occasions when one print was enough - the colours and the print looked so good I was reluctant to do further prints in case it was ruined.

For the log cabin part, I started with a Courthouse Steps design which had a larger than normal centre as I then cut the finished panel into four, rearranged the pieces so the centres were in the corners and then reassembled them.

The centre 'cross', which was the gelli printed fabric, was machine quilted along with 'in the ditch' for the other rounds.   For a change I bound each edge separately so I could have different colours.

I know it doesn't show in the photo, but the sizing of this quilt went horribly wrong!   I started by drawing it out on paper, cutting it up to see what it looked like and to help with the colour placing.  I then diligently added all the seam allowances, including those needed for the reassembling, but somehow or other it did not work out!    I managed to tweak it as far as I could but the long side is more 8.1/2" instead of 9".   Never mind, if at any stage they go for exhibition, I won't include this one which after all has been said, is one of my favourites this year.

Journal Quilt for June

Moving on from yellow, this month's JQ is yellow and green.

I started with a random pieced panel in the centre which was created using fused fabric which I bonded to a backing fabric and then cut to shape.  This was then bordered as a log cabin first with yellow which I then cut at angles before completing with a green border.

I was a bit worried about the raw edges on the centre panel so decided to machine quilt narrow lines and hope it was enough.

You may recall that one of the criteria for my quilts this year was to include some fabric that I have gelli printed.  Well, I got so carried away with creating the quilt that it was only when I had finished that I realised I hadn't used any printed fabric!   The border came to the rescue and I printed some fabric with fabric paint using my own foam shape blocks on the gelli plate.

Journal Quilt for May

I've now reached Yellow on my journey around the colour wheel so I decided as it was one colour I would do a 'whole cloth' quilt and print it after quilting.

I started with a piece of yellow fabric which I had in my dyed stash and quilted it as a traditional log cabin.   Once complete, I gelli printed it using a wooden block in a leaf design.  I use two shades of yellow fabric paint but as the quilt still looked a bit plain, I also added some prints using the same block.

For the binding, I used some more of the yellow fabric which had been printed in the same was as the quilt.

Another month, another Journal Quilt

For my April Journal Quilt I reached orange and yellow on the colour wheel and although on the face of it there is a traditional look to it, I used a variety of widths for the strips and included some orange and yellow striped strips too.  The centre square is also from the striped fabric.

I used a hand made block for the gelli printing on some of the yellow strips, using string wrapped around a piece of card and using an orange fabric paint.

To finish I machine quilted in straight lines from top to bottom, again varying the distances between the lines to reflect the different widths of the strips.

March JQ

Moving on to Orange for my March Journal Quilt, this log cabin is more or less formal but with each colour only used on three sides.   Once again I used my own dyed fabric in various shades of orange, some printed with a Gelli plate using a map stencil. The results of this month's gelli-printing were better and using less of the fabric paint seemed to make a difference.  

The finished quilt was   machine quilted in a spiral pattern, working diagonally across each strip, and then bound with some of the map-printed fabric.

February JQ

For my February Journal Quilt I continued my journey around the colour wheel, moving from red to red and orange.  It's not strictly on the wheel but a combination of two colours suits my plan for this year rather than the accepted red-orange.

I started with a piece of the same red fabric I used in January, placing it on the corner slightly to one side and used different width strips in a combination of plain orange and red fabric as well as some orange fabric I printed with red fabric paint using bubble wrap on a gelli plate.  I also put in some extra folded strips of red for accent.

It's the quilting of the finished block that always gets me stumped and this was no exception.  In the end I opted for quilting in the ditch on each strip as well as free machine quilting in a bubble pattern on the plain orange strips using an orange, red and yellow variegated thread.

The finished quilt was then bound with some fabric that had also been printed with the bubble wrap.

Once again I found the second print was better than the first but I think this is because I was putting too much paint on the gelli plate - this must be a difference between fabric paint and the acrylic paint I normally use - so next time I will be more sparing with the paint.